Vitek VTC-IRH70-650 Specifications download pdf (Page 17)

          VTC-IRH70-650



16

6.6.2 MOTION menu

To enter MOTION menu, press ● at MAIN

>SPECIAL>MOTION>ON.

Up to 4 motion detection areas can be

programmed by size, position, sensitivity and

display on/off.

If MOTION in MAIN>SPECIAL menu is set to

ON, ‘MOTION’ is displayed on the monitor

whenever the motion is detected and the

digital effect will appear if MOTION VIEW is

set to ON.

MOTION

Factory

Default

Descriptions

AREA

SELECT

AREA1

Selects one of 4 areas, AREA1~AREA4, to be

adjusted.

AREA

DISPLAY

ON

If set to ON, the window selected by AREA SELECT

appears and enables the motion detection for that

area and vice versa.

HOR. MOVE

12

Moves the window selected by AREA SELECT

leftward or rightward. In order to see the area

moving, AREA DISPLAY must be ON.

WIDTH

32

◀ decreases and ▶ increases WIDTH of the window

selected by AREA SELECT from the right.

In order to see the change, AREA DISPLAY must be

ON.

VER. MOVE

7

Moves the window selected by AREA SELECT

upward or downward. In order to see the area

moving, AREA DISPLAY must be ON.

HEIGHT

24

◀ decreases and ▶ increases HEIGHT of window

selected by AREA SELECT from the bottom. In order

to see the change, AREA DISPLAY must be ON.

SENSITIVITY

40

Motion SENSITIVITY may be adjusted between 0 and

40 for the window selected by AREA SELECT.

MOTION VIEW

OFF

If set to OFF, motion result will not be displayed.



1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments