Vitek VT-PTZ10 Instruction Manual download pdf (Page 17)

VT-PTZ10

D1 D4 D5 D8

....

2.7 Dome Camera Address (ID)

Each dome camera must have a unique address (ID). Identical IDs on the same line may

damage the control circuit caused by an electrical short. When installing multiple dome

cameras or a DVR, it is recommended that the dome camera ID’s be identical to the camera

port of the DVR.

Cam Port 1 = Dome ID1, Cam Port 2 = Dome ID 2 … Cam Port 16 = Dome ID 16.

If more than 16 dome cameras are installed using two or more DVRs the following formula is

useful to determine the Dome ID: ID =16x (n-1) +m (where n= number of DVR, m=Camera

Port)

Refer to Figures 9 for setting the dome camera address (ID) and protocol selection.

Figure 9 - Setting Dome Camera Address (ID) and Protocol

2.8 Setting Protocols

A Speed Dome camera is capable of negotiating with multiple protocols if the communication

speed is matched (same baud rate i.e., 9600 bps). See Figure 10 for the appropriate protocol

switch settings.

Note: Consult service personnel if a dome camera is installed with a device other than a

recommended Speed Dome Controller.

Figure 10 - Protocol Selection tables

Dip S/W Function

Protocol

Baud Rate

D8 Extended ID

Protocol D1 D2 D3 D4

AUTO Selection(no parity)

DEFAULT

Off Off Off Off

AUTO selection(even parity) On Off Off Off

PP Off On Off Off

EZ On On Off Off

S2 Off Off On Off

PD On Off On Off

VC Off On On Off

SN On On On Off

DC Off Off Off On

KReserved On Off Off On

PPS Off On Off On

SReserved On On Off On

SReserved Off Off On On

VVL On Off On On

DDI Off On On On

Reset On On On On

Baud Rate D5 D6 D7

2400 bps Off Off Off

4800 bps Off Off ON

9600 bps Off ON Off

19200 bps Off ON ON

38400 bps ON Off Off

Extended ID D8

1~99 Off

1~3999 On

DOME ID

S2 S1

1 0 1

. .

9 9

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Comments to this Manuals

No comments

Vitek VT-PTZ10 Instruction Manual Page 17

Comments to this Manuals

Related products and manuals for Security cameras Vitek VT-PTZ10