Vitek VT-3492 User Manual download pdf (Page 19)

CLEANING OF EXTERNAL SURFACES

• To avoid fire or electrical shock, unplug the system from electrical outlet before cleaning it.

• Be careful while cleaning the plastic parts. If the system's cabinet gets dusty, wipe it with the soft dry

fabric.

•To clear front panel from dust and fingerprints, wipe it with the soft fabric wetted in the light soap solu-

tion.

• Never use abrasive materials or polishing materials, because they can damage the external sur-

faces.

WARNING: DO NOT ALLOW WATER AND OTHER LIQUIDS TO GET INSIDE THE SYSTEM.

TROUBLE-SHOOTING

In the case you have encountered the troubles with operation of the system, please, acquaint yourself

with the recommendations below.

ENGLISH

TROUBLE POSSIBLE REASON SOLUTION

Noise or poor AM/FM receiver is not tuned Correct the station settings on

reception AM correctly the AM or FM bands

or FM bands

FM: Antenna is not spread at Fully spread the FM antenna

the full length.

AM: The system is Turn the body of the system

unsatisfactorily placed until the AM station reception

gets better.

FM STEREO FM STEREO mode is not on Choose the FM STEREO mode

indicator does not and tune up the antenna.

light up

No sound while listening TUNER mode is not switched on. Switch the TUNER mode on.

to the stations of AM

and FM bands

Volume level is too low. Increase the volume level.

No sound. TAPE mode is not switched on. Switch the TAPE mode on.

Volume level is too low. Increase the volume level.

The sound is distorted Magnetic heads are dirty. Clear the magnetic heads.

Tape playback speed Magnetic tape is old or Replace the cassette.

is not constant. damaged.

Pinch rollers or capstan Clean pinch rollers or

axis are dirty. capstan axis.

Cannot record. The safety tabs have been Seal the appropriate holes on

removed. the cassette with adhesive tape.

Distorted sound while Magnetic tape or magnetic Replace the cassette or clean

playback of the heads are dirty. the magnetic heads.

recorded tape.

3492.qxd 20.10.2004 18:30 Page 18

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

No comments

Vitek VT-3492 User Manual Page 19